Inspection For Self-Diagnosis Result St Ang Signal

Inspection For Self-diagnosis Result "ST ANG SIGNAL"

INSPECTION PROCEDURE
1. SELF-DIAGNOSIS RESULTS CHECK





Perform ABS actuator and electric unit (control unit) self-diagnosis

Is anything other than the above displayed in the self-diagnosis items?
Yes >> Perform repair or replacement for the item indicated
No >> Perform adjustment of steering angle sensor neutral position GO TO 2

2. PERFORM SELF-DIAGNOSIS AGAIN
1. Turn the ignition switch to OFF and then to ON to erase self-diagnosis results
2. Perform ABS actuator and electric unit (control unit) self-diagnosis again
Are any self-diagnosis results displayed?
Yes >> Replace steering angle sensor.
No >> Inspection End