Malfunction Indicator Lamp (MIL)

Malfunction Indicator Lamp (MIL)





1. The malfunction indicator lamp will light up when the ignition switch is turned ON without the engine running. This is for checking the lamp.
^ If the malfunction indicator lamp does not light up, refer to "Circuit Diagram" or "Malfunction Indicator Lamp (MIL)" (VG33E only) Or refer to "MIL AND DATA LINK CONNECTOR" (VG33E only) Malfunction Indicator Lamp (MIL)

^ or "MIL AND DATA LINK CONNECTOR" (VG33ER only), or "Malfunction Indicator Lamp (MIL)" (VG33ER only). Malfunction Indicator Lamp (MIL)

2. When the engine is started, the malfunction indicator lamp should go off.
If the lamp remains on, the on board diagnostic system has detected an emission-related (OBD-II) malfunction. For detail, refer to "ON BOARD DIAGNOSTIC (OBD) SYSTEM" (VG33E only) or "ON BOARD DIAGNOSTIC (OBD) SYSTEM" (VG33ER only). Introduction