C1144

Inspection 10 - When "Steering Angle Sensor Has Not Been Corrected" Appears on Self-Diagnosis Results Display
DTC C1144

1. CHECKING SELF-DIAGNOSIS RESULTS (1)
Check self-diagnosis results.

Self-diagnosis results
CONSULT-II display items
ST angle SEN CIRCUIT

Does anything besides "ST angle SEN CIRCUIT" appear on self-diagnosis results display?

YES >> Inspect and repair the indicated items. Then perform self-diagnosis again.
NO >> Perform adjustment of steering angle sensor neutral position. Then GO TO 2.

2. CHECKING SELF-DIAGNOSIS RESULTS (2)
1. Turn ignition switch OFF, and ON to erase self-diagnosis results, and perform ABS actuator and electric unit (control unit) self-diagnosis again.

Does anything appear on self-diagnosis results display?

YES >> Replace steering angle sensor (built into spiral cable). Then perform adjustment of neutral position and perform self diagnosis again.
NO >> Inspection is completed.