Headliner: Service and Repair

HEADLINING




Removal and Installation

CAUTION: Disconnect both terminals from battery in advance.

1. Remove front and center pillar garnish.
2. Remove rear pillar finisher.
3. Remove front and rear door welts. Refer to "BODY SIDE TRIM".
4. Remove assist grips.
5. Remove interior lamp.
6. Remove map lamp.
7. Remove storage bin.
8. Remove sunvisors and clips.
9. Remove windshield garnish molding. Refer to "BODY SIDE TRIM".
10. Remove sunroof welt (if equipped).
11. Remove clips attached to roof.
12. Open left rear door and remove headlining through door opening. Installation is in the reverse order of removal.