Inspection For Self-Diagnosis Result "ST Angle Sen Signal"

Inspection For Self-diagnosis Result "ST ANGLE SEN SIGNAL"

INSPECTION PROCEDURE





1. PERFORM SELF-DIAGNOSIS
Perform ABS actuator and electric unit (control unit) self-diagnosis.
Do self-diagnosis results indicate anything other than shown above?
YES >> Perform repair or replacement for the item indicated.
NO >> Perform adjustment of steering angle sensor neutral position. Refer to BRC-212, "Adjustment of Steering Angle Sensor Neutral Position". Testing and Inspection
GO TO 2.
2. PERFORM SELF-DIAGNOSIS AGAIN
1. Turn the ignition switch to OFF and then to ON and erase self-diagnosis results.
2. Perform ABS actuator and electric unit (control unit) self-diagnosis again.
Are any self-diagnosis results displayed
YES >> Replace steering angle sensor.
NO >> Inspection End.