Rear Window Molding

REAR WINDOW MOLDING




Removal and Installation

REMOVAL OF BACK DOOR WINDOW MOLDING
Remove back door window molding.

NOTE: Apply a strip of protective tape along the contour of back door window glass (molding) to prevent paint surface from being damaged.

INSTALLATION OF BACK DOOR WINDOW MOLDING
Install back door window molding.

NOTE:
- Clean adhesive portion of back door window glass and around circumference with white gasoline.
- Apply dam rubber to all surfaces of glass.
- Attach back door window molding to side face of glass.
- Back door window molding should not overlap on the surface of back door window glass.