Power Trunk / Liftgate Lock Actuator: Service and Repair

BACK DOOR LOCK

Removal and Installation of Back Door Lock & Back Door Opener Actuator

REMOVAL
1. Remove back door weatherstrip.
2. Remove luggage finisher lower (center).
3. Disconnect the connector and the clip of the back door opener.




4. Remove the mounting bolts.
5. Disconnect the connector of the back door opener actuator and back door opener cable, remove the bracket.




6. Remove the mounting nuts, remove back door lock and back door opener actuator.

INSTALLATION
Install in the reverse order of removal.

CAUTION:
- After installing, check operation.
- After installing, perform fitting adjustment. Refer to BL-109, "Fitting Adjustment". Back Door

INSPECTION
1. Check back door lock for the following items.
- Malfunction noise or door closing and opening effort
- Component wear or damage

2. Apply body grease to the rotating part of the back door lock.