Coupe

LUGGAGE FLOOR TRIM







Removal and Installation (for Coupe Models)

LUGGAGE FLOOR TRIM

Removal
1. Remove back door welt.
2. Remove luggage floor carpet.
3. Remove spare tire cover.
4. Remove luggage finisher lower (center).
5. Remove luggage side finisher upper (RH/LH).
6. Remove strut cover upper (RH/LH).
7. Remove strut cover rear.
8. Remove clip of luggage side finisher lower and remove luggage side finisher lower.
9. Remove strut cover front.
10. Remove strut cover upper (center).
11. Remove clip of strut cover lower (RH/LH) and remove strut cover lower.
12. Remove strut cover lower (center).

Installation
Install in the reverse order of removal.

REAR FLOOR BOX

Removal
1. Remove kicking plate inner.
2. Remove body side welt.
3. Remove rear side finisher.
4. Remove console box.
5. Remove screw of rear floor box and remove rear floor box.
6. Remove pins of rear floor box lid and remove rear floor box lid.
7. Remove luggage floor finisher mask.
8. Remove screws of rear floor box lock and remove rear floor box lock.
9. Remove tray.

Installation
Install in the reverse order of removal.

CAUTION: To install, check if all clips are matched over holes panel on vehicle, then push on.