Trunk Lid Lock Assembly

Removal and Installation of Trunk Lid Lock Assembly

REMOVAL
1. Remove the trunk lid weatherstrip.
2. Remove trunk lid release lever.




3. Remove the trunk lid finisher.
4. Disconnect the release lever cable and trunk lid opener cable from the clip.
5. After removing the harness connector, remove the mounting bolts, and remove the trunk lid lock.

INSTALLATION
1. Install in the reverse order of removal.

CAUTION:
- After installing, close the trunk lid height. Perform the lock and surface height adjustment. Refer to BL-116, "Fitting Adjustment". Trunk Lid
- After installing, check the operation.