Headlamp (For Canada) - Daytime Light System

Bulb Replacement

HEADLAMP HIGH/LOW BEAM




1. Turn lighting switch OFF.
2. Open the driver and front passenger window, and then disconnect the battery cable from the negative terminal or remove power fuse.

CAUTION: After the battery cables are disconnected, never open/close the driver and/or front passenger door with the window in the full up position. The automatic window adjusting function will not work and the side roof panel may be damaged.

3. Remove headlamp.
4. Turn plastic cap counterclockwise and unlock it.
5. Turn bulb socket counterclockwise and unlock it.
6. Unlock retaining spring and remove bulb from headlamp.
7. Installation is the reverse order of removal.

NOTE: After installation, perform aiming adjustment. Refer to LT-68, "Aiming Adjustment". Headlamp (For Canada) - Daytime Light System

Headlamp high/low beam (Xenon): 12 V - 35 W (D2R)