Shift Control Components

Shift Control Components





1. Install adapter setting plate to the adapter plate and then fixing in adapter setting plate using a vise.
Tool number: ST22490000 ( - )

CAUTION: Do not directly secure the surface in a vise.





2. Remove baffle plate mounting bolts, and remove baffle plate from the adapter plate.
3. Remove magnet from the adapter plate.





4. Remove retaining pin using a pin punch, and remove striking lever and striking rod.





5. Remove check ball plugs and then remove check ball springs and check balls from the adapter plate.





6. Remove 3rd-4th control lever mounting bolts and then remove 3rd-4th control lever and shifter cap.





7. Remove check ball plug and then remove check ball spring and check ball from the adapter plate.





8. Using a pin punch to knock out retaining pin, and then remove 3rd-4th fork rod bracket and 3rd-4th fork rod.





9. Using a pin punch to knock out retaining pin, and then remove 3rd-4th shift fork and 3rd-4th fork rod (reversal side).





10. Remove check balls and interlock pin from the adapter plate.





11. Using a pin punch to knock out retaining pin, and then remove 1st-2nd shift fork and 1st-2nd fork rod.





12. Remove interlock plunger and interlock pin from the adapter plate.





13. Using a pin punch to knock out retaining pin, and then remove reverse shift fork and reverse fork rod.





14. Remove check balls from the adapter plate.





15. Remove 5th-6th control lever mounting bolts and then remove 5th-6th control lever from the adapter plate.





16. Using a pin punch to knock out retaining pin, and then remove 5th-6th fork rod bracket and 5th-6th fork rod.





17. Using a pin punch to knock out retaining pin, and then remove 5th-6th fork rod (reversal side) and 5th-6th shift fork.