Removal And Installation

INSTRUMENT PANEL ASSEMBLY

Removal and Installation

INSTRUMENT PANEL







Removal

CAUTION:
Before servicing, turn the ignition switch off, disconnect both battery cables and wait at lease 3 minutes.

1. Disconnect battery negative terminal.
2. Disconnect battery positive terminal.
3. Remove the center console.
4. Remove the combination meter.
5. Remove front pillar upper finisher.
6. Remove audio unit.
7. Remove cluster lid D.
8. Remove the passenger air bag module.
9. Remove the instrument stay RH/LH bolts.
10. Remove instrument panel.
- Disconnect all remaining harnesses.

Installation
Installation is in the reverse order of removal.

CLUSTER LID C




Removal

CAUTION: Before servicing, turn the ignition switch off, disconnect both battery cables and wait at lease 3 minutes.

1. Disconnect battery negative terminal.
2. Disconnect battery positive terminal.
3. Pull cluster lid C rearward to release clips.
4. Disconnect electrical connectors and remove cluster lid C.

Installation
Installation is in the reverse order of removal.

CLUSTER LID D




Removal
1. Remove center console.
2. Remove lower instrument panel LH.
3. Remove lower instrument panel RH.
4. Remove cluster lid C.
5. Disconnect the cluster lid C connectors.
6. Remove cluster lid D screws.
7. Disconnect cluster lid D connectors and remove cluster lid D.

Installation
Installation is in the reverse order of removal.

LOWER INSTRUMENT PANEL LH

Removal
1. Remove front pillar lower finisher.




2. Remove lower instrument panel LH screws, using power tool.
3. Pull rearward to release clips, disconnect connectors, and remove lower instrument panel LH.

Installation
Installation is in the reverse order of removal.

COMBINATION METER




Removal
1. Disconnect the negative battery cable.
2. Remove front pillar upper finisher.
3. Remove lower instrument panel LH.
4. Remove steering lock escutcheon.
5. Remove cluster lid A, using power tool.
6. Remove combination meter, using power tool.
7. Disconnect combination meter electrical connectors.

Installation
Installation is in the reverse order of removal.

A/T FINISHER

Removal

1. Remove cup holder finisher.




2. Pull up to release clips and remove the A/T finisher.
3. Remove A/T finisher bezel.

Installation
Installation is in the reverse order of removal.

M/T FINISHER

Removal
1. Remove cup holder finisher.
2. Remove shift knob.




3. Pull up to release clips and remove the M/T finisher.

Installation
Installation is in the reverse order of removal.

LOWER INSTRUMENT PANEL RH AND LOWER GLOVE BOX

Removal
1. Remove front pillar lower finisher.
2. Remove lower instrument panel RH screws, using power tool.
3. Remove lower instrument panel RH and lower glove box.

Installation
Installation is in the reverse order of removal.

NOTE: Upper glove box assembly must be installed prior to lower glove box assembly.

UPPER GLOVE BOX

Removal
1. Remove lower instrument panel RH and lower glove box.
2. Remove cluster lid C.
3. Remove upper glove box screws, using power tool.
4. Remove upper glove box.

Installation
Installation is in the reverse order of removal.

CENTER CONSOLE




Removal
1. Remove lower instrument panel RH.
2. Remove cluster lid C.
3. Remove A/T or M/T finisher.
4. Remove center console screws.
5. Disconnect electrical connectors and remove center console.
6. Remove center console screws.
7. Disconnect electrical connectors and remove center console.

Installation
Installation is in the reverse order of removal.