Headliner: Service and Repair

HEADLINING




Removal and Installation

REMOVAL
1. Disconnect both the negative and positive battery terminals.
2. Remove body side trim panels.
3. Remove luggage floor trim upper panels.
4. Remove sun visor assemblies, both LH/RH.
5. Remove sun visor holders LH/RH.
6. Remove cargo hooks.
7. Remove assist grips.
8. Release the clips and loosen the seat belt escutcheon from the headlining.
9. Remove the center and rear room lamp assemblies.
10. Remove headlining.

NOTE:
Use an assistant to steady the headlining while lowering from roof.
- Remove clips from center of headlining.
- Remove clips from rear of headlining.
- Disconnect rear washer tube at front connection, allow to drain.
- Disconnect harnesses and rear washer tube rear connections.
- Thread seat belt escutcheon through cutout in headlining.

INSTALLATION
Installation is in the reverse order of removal.