Oil Pump

Oil Pump

Image Symbols:

DISASSEMBLY





1. Remove oil pump housing from oil pump cover.





2. Remove oil pump housing oil seal using suitable tool.

CAUTION: Be careful not to scratch oil pump housing.





3. Remove O-ring from oil pump housing.





4. Remove O-ring from oil pump cover.

ASSEMBLY





1. Install new O-ring to oil pump cover.

CAUTION:
^ Do not reuse O-ring.
^ Apply ATF to O-ring.





2. Install new O-ring to oil pump housing.

CAUTION:
^ Do not reuse O-ring.
^ Apply ATF to O-ring.





3. Install oil pump housing oil seal to the oil pump housing until it is flush using Tool.
Tool number: ST33400001 (J-26082)

CAUTION:
^ Do not reuse oil seal.
^ Apply ATF to oil seal.





4. After temporarily tightening the bolts for the oil pump housing to the oil pump cover, tighten them as shown.
Oil pump cover bolts: 9.0 Nm (0.92 kg-m, 80 inch lbs..)