Changing Differential Gear Oil

Image Symbols:

Changing Differential Gear Oil
DRAINING
1. Stop the engine.





2. Remove the drain plug and gasket. Drain the gear oil.
3. Install the drain plug with a new gasket to the final drive assembly. Tighten to the specified torque. Refer to FFD-16, "COMPONENTS".

CAUTION: Do not reuse gasket.

FILLING





1. Remove the filler plug and gasket. Fill with new gear oil until the oil level reaches the specified level near the filler plug hole.
Oil grade and capacity: Refer to MA-11, "Fluids and Lubricants". Fluids
2. After refilling oil, check the oil level. Install the filler plug with a new gasket on it to the final drive assembly. Tighten to the specified torque. Refer to FFD-16, "COMPONENTS".

CAUTION: Do not reuse gasket.