Radiator Support: Service and Repair

RADIATOR CORE SUPPORT

Removal and Installation

REMOVAL
1. Remove the hood.
2. Remove the front bumper reinforcement. Refer to "REAR BUMPER".
3. Remove the hood lock assembly.
4. Remove the air duct.
5. Remove both headlamps.
6. Remove the crash zone sensor.
7. Remove the I-key buzzer.
8. Remove the horn.
9. Remove the air guide and hood lock cable clip.
10. Remove the washer tank. Refer to "Removal and Installation of Washer Fluid Reservoir".
11. Remove the radiator.
12. Remove the AC condenser.




13. Remove the bolts (a) and the radiator core support (1).

INSTALLATION
Installation is in the reverse order of removal.