C1163

Steering Angle Sensor Safe Mode Inspection

INSPECTION PROCEDURE
1.INDICATOR LAMP CHECK
Check that VDC OFF indicator lamp is on.
OK or NG
OK - GO TO 2.
NG - GO TO 3.

2.ADJUSTMENT OF STEERING ANGLE SENSOR NEUTRAL POSITION
Adjust steering angle sensor neutral position.
OK or NG
OK - GO TO 3.
NG - Check steering angle sensor.

3.INDICATOR LAMP CHECK
Check that VDC OFF indicator lamp is off.
OK or NG
OK - GO TO 4.
NG - Perform basic inspection. Refer to BRC-102, "Basic Inspection". Basic Inspection

4.CHECK SELF-DIAGNOSTIC RESULTS
Perform ABS actuator and electric unit (control unit) self-diagnosis.





NOTE: When self-diagnostic results show items other than those above, perform repair or replacement for the item indicated and repeat self-diagnosis.

Is the above displayed on self-diagnosis display?
YES - Erase error memory.
NO - Inspection End.