Removal and Installation

Removal and Installation

COMBINATION LAMP ASSEMBLY (FRONT)

CAUTION:
- Turn headlamp switch OFF before disconnecting headlamp harness connector.
- Do not touch bulb by hand right after being turned off. Burning may result.
- Do not touch the glass of bulb directly by hand. Keep grease and other oily substances away from it.
- Do not leave bulb out of combination lamp assembly (front) for a long time because dust, moisture, smoke, etc. may affect the performance of the lamp. When replacing bulb, be sure to replace it with a new one.

Removal
1. Disconnect combination lamp assembly (front).
2. Remove front fascia. Refer to "FRONT BUMPER".




3. Remove combination lamp assembly (front) bolts.
4. Remove combination lamp (front) assembly.

Installation
Installation is in the reverse order of removal.