Yaw Rate Sensor: Service and Repair

G SENSOR

Removal and Installation
REMOVAL
1. Remove center console or center seat as required.





2. Remove yaw rate/side/decel G sensor nuts as shown.
^ The location of the sensor is the same for all models.

CAUTION:
^ Do not use power tools to remove or install yaw rate/side/decel G sensor.
^ Do not drop or strike the yaw rate/side/decel G sensor.

3. Disconnect harness connector and remove the yaw rate/side/decel G sensor.

INSTALLATION
Installation is in the reverse order of removal.

CAUTION: After installation, calibrate the yaw rate/side/decel G sensor.