Inspection After Disassembly

INSPECTION AFTER DISASSEMBLY

Case





Check contact surfaces of shift rod and bearing for wear and damage. If any is found, replace with new one.

Sleeve





Check items below. If necessary, replace them with new one.
^ Damage and excessive wear of contact surfaces of sprocket, mainshaft and sleeve.
^ Sleeve must move smoothly.

Gear, Shaft and Drive Chain





Check items below. If necessary, replace them with new ones.
^ Damage, peeling, uneven wear and bending of the shaft.
^ Excessive wear, damage and peeling of the gear.
^ Excessive wear or damage to the drive chain

Bearing





Check the bearing for damage and rough rotation. If necessary, replace it with a new one.