Self-Diag Result Mode

SELF-DIAG RESULT MODE

Operation Procedure
1. Perform "CONSULT-II START PROCEDURE". Refer to GI-38, "CONSULT-II Start Procedure". With Manufacturer's Scan Tool





2. With engine at idle, touch "SELF-DIAG RESULTS".
Display shows malfunction experienced since the last erasing operation.

NOTE: The details for "TIME" are as follows:
^ "0": Error currently detected with transfer control unit.
^ Except for "0": Error detected in the past and memorized with transfer control unit.
Detects frequency of driving after DTC occurs (frequency of turning ignition switch "ON/OFF").