Cannot Be Changed to Manual Mode (Column Shift)

Cannot Be Changed to Manual Mode (Column Shift)

SYMPTOM: Does not change to manual mode when manual shift gate is used.

DIAGNOSTIC PROCEDURE

1. MANUAL MODE SWITCH
Check the manual mode switch. Refer to AT-157, "DTC P1815 MANUAL MODE SWITCH". P1841
OK or NG
OK >> GO TO 2.
NG >> Repair or replace damaged parts.

2. CHECK SELF-DIAGNOSIS RESULTS
Perform self-diagnosis. Refer to AT-89, "SELF-DIAGNOSTIC RESULT MODE". Self-Diagnostic Result Mode
Do the self-diagnosis results indicate turbine revolution sensor?
YES >> Check the malfunctioning system. Refer to AT-107, "DTC P0717 TURBINE REVOLUTION SENSOR". P0717
NO >> INSPECTION END