Rear Door Window Glass: Service and Repair

Rear Door Glass

REMOVAL
1. Remove the rear door finisher. Refer to "DOOR FINISHER".
2. Remove the inside seal.
3. If equipped, temporarily reconnect the power window switch.
4. Remove the glass run from the partition glass.




5. For power windows, operate the power window switch to raise/ lower the door window until the glass bolts can be seen.
6. For manual windows, temporarily reinstall the window crank handle and lower the window until the glass bolts can be seen.
7. Remove the partition sash bolt (lower) and screw (upper) to remove the sash.
8. Remove the bolts and the glass.

INSTALLATION
Installation is in the reverse order of removal.

Glass bolts : 5.7 N.m (0.58 kg-m, 50 in-lb)

- Check the glass alignment. Refer to GW-53, "FITTING INSPECTION". Testing and Inspection