Seatback Trim and Pad

Disassembly and Assembly

SEATBACK TRIM AND PAD

Disassembly

NOTE:
- Only complete seatback assemblies can be replaced on vehicles equipped with side air bags.
- When removing or installing the seat trim, handle it carefully to keep dirt out and avoid damage.

1. Remove the seatback assembly.
2. Remove the headrest.




3. From inside of the seatback, squeeze the headrest holder tabs at the base of the stay pipe and pull the up to remove.

NOTE: Before installing the headrest holder, check its orientation (front/ rear and right/left).




4. Remove the snap ring and the lumbar support lever knob (if equipped).
5. Remove the seatback trim and pad assembly. Remove the hog rings to separate the seatback trim from the pad.

Assembly
Assembly is in the reverse order of disassembly.