Direct Clutch

Direct Clutch

Exploded View AT-295:

DISASSEMBLY





1. Remove snap ring from direct clutch drum using suitable tool.
2. Remove retaining plates, drive plates, driven plates and dish plate from direct clutch drum.

INSPECTION
^ Check the following, and replace direct clutch assembly if necessary.

Direct Clutch Snap Ring
^ Check for deformation, fatigue or damage.

Direct Clutch Drive Plates
^ Check facing for burns, cracks or damage.

Direct Clutch Retaining Plate and Driven Plates
^ Check facing for burns, cracks or damage.

ASSEMBLY





1. Install dish plate (5), retaining plates (2), drive plates (3) and driven plates (4) in direct clutch drum.
^ Snap ring (1)

CAUTION: Take care with order of plates.

NOTE: There are 5 drive plates and 4 driven plates.





2. Install snap ring in direct clutch drum using suitable tool.