Dove Tail Female (Roadster)

DOVE TAIL FEMALE ADJUSTMENT (ROADSTER)
Adjust the dove tail female so that it becomes parallel with the lock insertion direction.

Removal and Installation

CAUTION:
- When removing and installing the door assembly, support the door with a jack and cloth to protect the door and body.
- When removing and installing door assembly, be sure to perform the fitting adjustment Refer to BL-82, "Fitting Adjustment". Adjustments
- Operate with two workers, because of its heavy weight.
- Check the hinge rotating part for poor lubrication. If necessary, apply "body grease".
- After installing, check operation.
- Apply sealant and coat with the same body color paint to door hinge installation part and mounting nuts.

REMOVAL




1. Pull the lever and remove the door harness connector while removing tabs of door harness connector.




2. Remove the mounting bolts of the check link on the vehicle.




3. Remove the door-side hinge mounting nuts, and remove the door assembly.

INSTALLATION
Install in the reverse order of removal.