Accelerator Pedal Position Sensor: Service and Repair

ACCELERATOR CONTROL SYSTEM

Removal and Installation

Exploded View ACC-3:

REMOVAL
1. Disconnect accelerator pedal position sensor harness connector.
2. Loosen nuts, and remove accelerator pedal assembly.

CAUTION:
- Never disassemble accelerator pedal assembly. Never remove accelerator pedal position sensor from accelerator pedal assembly.
- Avoid impact from dropping etc. during handling.
- Be careful to keep accelerator pedal assembly away from water.

INSTALLATION
Installation is the reverse order of removal.

INSPECTION AFTER INSTALLATION
- Check that accelerator pedal moves smoothly within the whole operation range.
- Check that accelerator pedal securely returns to the original position.
- For the electrical inspection of accelerator pedal assembly, refer to EC-577, P2122 EC-584 P2127 and EC-592. P2138

CAUTION: When harness connector of accelerator pedal position sensor is disconnected, perform "Accelerator Pedal Released Position Learning". Refer to EC-76, "Accelerator Pedal Released Position Learning". Testing and Inspection