Oil Pump

Oil Pump

AT-255 COMPONENTS:

DISASSEMBLY





1. Remove oil pump housing from oil pump cover.





2. Remove oil pump housing oil seal using a flat-bladed screwdriver.

CAUTION: Be careful not to scratch oil pump housing.





3. Remove O-ring from oil pump housing.





4. Remove O-ring from oil pump cover.

ASSEMBLY





1. Install O-ring to oil pump cover.

CAUTION:
^ Do not reuse O-ring.
^ Apply ATF to O-ring.





2. Install O-ring to oil pump housing.

CAUTION:
^ Do not reuse O-ring.
^ Apply ATF to O-ring.





3. Install oil pump housing oil seal to the oil pump housing until it is flush using the drift.

CAUTION:
^ Do not reuse oil seal.
^ Apply ATF to oil seal.

4. Install oil pump housing to oil pump cover.





5. Tighten bolts to the specified torque in numerical order shown in the figure after temporarily tightening them. Refer to "COMPONENTS".