Air Breather Hose

AIR BREATHER HOSE

Removal and Installation

MT-15 Components:

REMOVAL
1. Remove battery.
2. Remove air duct (Inlet), air duct and air cleaner case.
3. Remove air breather hose.

CAUTION: When air breather hose is removed, be sure to hold two way connector securely.

INSTALLATION
Installation is in the reverse order of removal.
^ When installing air breather hose on two way connector, aim paint mark face toward the vehicle front.
^ When installing air breather hose on two way connector, push it until it hits transaxle case.
^ When installing air breather hose to air duct and air cleaner case, make sure that clips are fully inserted.

CAUTION: Make sure air breather hose is not collapsed or blocked due to folding or bending when installed.