Engine Cannot Be Started In "P" Or "N" Position

SYSTEM SYMPTOM


Engine Cannot Be Started in "P" or "N" Position


SYMPTOM:
- Engine cannot be started with selector lever in "P" or "N" position.
- Engine can be started with selector lever in "D", "3", "2", "1"or "R" position.

DIAGNOSTIC PROCEDURE
1.CHECK SELF-DIAGNOSIS RESULTS
Perform self-diagnosis. Refer to CONSULT-III Function (Transmission).
Do the self-diagnosis results indicate PNP switch?
YES - Check the malfunctioning system. Refer to P0705 P0705 P0705 P0705 P0705 P0705.
NO - GO TO 2.
2.CHECK CONTROL CABLE
Check the control cable.
- Refer to Adjustments.
OK or NG
OK - GO TO 3.
NG - Adjust control cable. Refer to Adjustments.
3.CHECK STARTING SYSTEM
Check the starting system. Refer to A/T System Description.
OK or NG
OK INSPECTION END
NG - Repair or replace damaged parts.