Truck Bed: Service and Repair

BODY CONSTRUCTION


Rear Body


REMOVAL AND INSTALLATION






Removal
1. If equipped, remove the floor rails. Refer to .
2. Disconnect both of the rear combination lamp wire harnesses.
3. If equipped, remove the bed power point. Refer to Front Power Socket LH, Rear Power Socket (Cargo Bed).
4. Disconnect the fuel filler neck from the bed side outer.
5. Remove the rear bumper assembly.
6. Remove the pick-up bed assembly.

Installation
Installation is in the reverse order of removal.
- Shim as necessary for proper fit and finish.