With Intelligent Key System

REMOTE KEYLESS ENTRY RECEIVER


Removal and Installation


REMOVAL
1. Disconnect the battery negative cable. Removal And Installation.
2. Remove the front pillar upper finisher (RH). Service and Repair.
3. Remove the side ventilator grille (RH). Exploded View.
4. Remove the instrument side finisher. Exploded View.
5. Remove the upper glove box. Exploded View.





6. Remove the bolt (A), disconnect the harness connector (1) and remove the remote keyless entry receiver (2).

INSTALLATION
Installation is in the reverse order of removal.