With Intelligent Key System

GLASS HATCH LOCK ACTUATOR


Description

Locks/unlocks the glass hatch with the signal from BCM.




GLASS HATCH LOCK ACTUATOR


Diagnosis Procedure

Regarding Wiring Diagram information, Power Door Lock System.
1.CHECK GLASS HATCH LOCK ACTUATOR SIGNAL
1. Turn ignition switch OFF.





2. Check voltage between BCM connector M20 terminals 65, 66 and ground.






Is the inspection result normal?
YES - GO TO 2
NO - GO TO 3
2.CHECK GLASS HATCH LOCK ACTUATOR HARNESS
1. Disconnect BCM and glass hatch lock actuator.





2. Check continuity between BCM connector (A) M20 terminals 65, 66 and glass hatch lock actuator connector (B) D508 terminals 2, 4.






Is the inspection result normal?
YES - Replace glass hatch lock actuator.
NO - Repair or replace harness.
3.CHECK GLASS HATCH LOCK ACTUATOR HARNESS
1. Disconnect BCM and glass hatch lock actuator.





2. Check continuity between BCM connector M20 terminals 65, 66 and ground.






Is the inspection result normal?
YES - Replace BCM. Service and Repair.
NO - Repair or replace harness.