Dimmer Switch: Service and Repair

ILLUMINATION


Removal and Installation


ILLUMINATION CONTROL SWITCH

Removal





The illumination control switch (1) is replaced as a part of the combination meter assembly. Service and Repair.

Installation
Installation is in the reverse order of removal.

GLOVE BOX LAMP

Removal
1. Remove lower instrument panel RH and glove box. Removal And Installation.





2. Rotate glove box lamp socket (3) with bulb (1) counterclockwise, then pull away from lamp shield (2) on steering member to remove.
- Arrow Indicates Vehicle front

Installation
Installation is in the reverse order of removal.

Bulb Replacement
1. Remove glove box lamp.





2. Pull bulb (2) straight out from glove box lamp socket (1) to remove.

Glove box lamp bulb : 12V - 3.4W

AT FINISHER LAMP

Removal
1. Remove AT finisher from center console. Removal And Installation.





2. Rotate AT finisher lamp socket (2) with bulb (3) counterclockwise, then pull away from finisher (1).

Installation
Installation is in the reverse order of removal.

Bulb Replacement
1. Remove AT finisher from center console. Removal And Installation.





2. Remove AT finisher lamp socket (1), then pull bulb (2) straight out from socket.

AT finisher lamp bulb : 12V - 3W