LH Only Window Anti-Pinch
POWER WINDOW MAIN SWITCH
Removal and Installation
REMOVAL
1. Using a suitable tool, release the pawls, then lift upward the main power window/door lock switch and finisher as an assembly.
CAUTION:
Wrap a cloth around suitable tool to protect components from damage.
2. Disconnect the harness connector.
3. Remove the main power window/door lock switch and finisher assembly from the front door finisher.
4. Release the four tabs (two on each side) with a suitable tool (A), then separate the main power window/door lock switch (1) from the switch finisher (2).
broken Circle indicates Pawl
CAUTION:
Do not bend back the pawls of the switch finisher too far or breakage will occur.
INSTALLATION
Installation is in the reverse order of removal.
NOTE:
Perform initialization procedure after switch is connected. LH Only Window Anti-Pinch.