LH Only Window Anti-Pinch

DIAGNOSIS AND REPAIR WORK FLOW


Work Flow


OVERALL SEQUENCE






DETAILED FLOW
1. INTERVIEW FOR MALFUNCTION
Interview the symptom to the customer.
- GO TO 2
2. SYMPTOM CHECK
Check the symptom from the customer's information.
- GO TO 3
3. BASIC INSPECTION
Check the operation of each part. Check that any symptom occurs other than the interviewed symptom.
- GO TO 4
4. SELF-DIAGNOSIS WITH CONSULT-III
Perform the self-diagnosis with CONSULT-III. Check that any DTC is detected.
Is any DTC detected?
YES - GO TO 5
NO - GO TO 6
5. TROUBLE DIAGNOSIS BY DTC
Perform the trouble diagnosis for the detected DTC. Specify the malfunctioning part.
- GO TO 9
6. FAIL-SAFE ACTIVATION CHECK
Check that the symptom is applied to the fail-safe activation.
Does the fail-safe activate?
YES - GO TO 7
NO - GO TO 8
7. SYSTEM DIAGNOSIS
Perform the system diagnosis for the system that the fail-safe activates. Specify the malfunctioning part.
- GO TO 9
8. SYMPTOM DIAGNOSIS
Perform the symptom diagnosis. Specify the malfunctioning part.
- GO TO 9
9. MALFUNCTION PART REPAIR
Repair or replace the malfunctioning part.
- GO TO 10
10. REPAIR CHECK (SELF-DIAGNOSIS WITH CONSULT-III)
Perform the self-diagnosis with CONSULT-III. Check that any DTC is not detected. Erase DTC if DTC is detected before the repair. Check that DTC is not detected again.
Is any DTC detected?
YES - GO TO 5
NO - GO TO 11
11. REPAIR CHECK (OPERATION CHECK)
Check the operation of each part.
Does it operate normally?
YES - Inspection End.
NO - GO TO 3