Keyless Entry Receiver: Service and Repair

REMOTE KEYLESS ENTRY RECEIVER


Removal and Installation


REMOVAL
1. Remove the front pillar upper finisher (RH). Removal And Installation.
2. Remove the side ventilator grille (RH). Removal And Installation.
3. Remove the upper glove box. Removal And Installation Instrument Panel.
4. Remove cluster lid D. Removal And Installation Instrument Panel.





5. Remove the remote keyless entry receiver bolt (A).
6. Disconnect the harness connector (1) and remove the remote keyless entry receiver (2).

INSTALLATION
Installation is in the reverse order of removal.
- Perform TPMS ID registration. ID Registration Procedure.