Trouble Diagnosis Without CONSULT-III

ON BOARD DIAGNOSTIC (OBD) SYSTEM


Self-Diagnosis Function (Without CONSULT-III)

- The reading of these results is accomplished using one of two modes --"User mode" and "Diagnosis mode".
- After a malfunction is repaired, turn the ignition switch OFF for at least one second, then back ON. Diagnosis mode returns to the User mode. At that time, the self-diagnostic result is cleared.

DIAGNOSTIC PROCEDURE 4

Check SRS Repair History
1.CONSIDER POSSIBILITY THAT SELF-DIAGNOSTIC RESULT WAS NOT ERASED AFTER REPAIR
Check repair history of the SRS.
Have any previous repairs been made to the SRS?
YES - Self-diagnostic result "SELF-DIAG [PAST]" (previously stored in the memory) might not be erased after repair. Perform DIAGNOSTIC PROCEDURE 3. SEE Self-Diagnosis Function (Without CONSULT-III).
NO - Perform DIAGNOSTIC PROCEDURE 2. Diagnostic Procedure 1.