Disassembly

SHIFT CONTROL COMPONENTS


Disassembly


SHIFT CONTROL COMPONENTS
1. Remove rear extension (or OD gear case) and transmission case. Transmission Assembly.





2. Install Tool to adapter plate, and then position in a vise.






CAUTION:
Do not directly secure mating surface of adapter plate in a vise.





3. Remove baffle plate bolts, and then remove baffle plate from adapter plate.





4. Remove check ball plugs, check ball springs and check balls from adapter plate.





5. Remove 3rd-4th control lever bolts, and then remove 3rd-4th control lever and shifter cap from adapter plate.





6. Remove retaining pin using suitable tool, and then remove 3rd -4th fork rod bracket and 3rd-4th fork rod from adapter plate.





7. Remove check balls and interlock pin from adapter plate.





8. Remove retaining pin using a suitable tool, and then remove
3rd-4th shift fork and 3rd-4th fork rod (reversal side) from adapter plate.





9. Remove retaining pin using a suitable tool, and then remove 1st-2nd shift fork and 1st-2nd fork rod from adapter plate.





10. Remove interlock plunger and interlock pin from adapter plate.





11. Remove retaining pin using suitable tool, and then remove reverse shift fork and reverse fork rod from adapter plate.





12. Remove check balls from adapter plate.





13. Remove retaining pin using suitable tool, and then remove 5th-6th fork rod bracket and 5th-6th fork rod from adapter plate.





14. Remove 5th-6th control lever bolts, and then remove 5th-6th control lever from adapter plate.





15. Remove retaining pin using suitable tool, and then remove 5th-6th shift fork and 5th-6th fork rod (reversal side) from adapter plate.





16. Remove retaining pin using suitable tool, and then remove stopper ring from striking rod assembly.





17. Remove striking rod assembly from adapter plate.