Front Power Window Switch

FRONT POWER WINDOW SWITCH


Removal and Installation


REMOVAL




Broken Square Indicates Metal clip
Broken Circle Indicates Pawl

1. Using a suitable tool, release the metal clip and pawls, then lift upward the front power window/door lock switch and finisher (2)
- RH as an assembly.

CAUTION:
Wrap a cloth around suitable tool to protect components from damage.
2. Disconnect the harness connector.
3. Remove the front power window/door lock switch and finisher
(2) - RH assembly from the front door finisher.
4. Release the four tabs (A), two on each side, then separate the front power window/door lock switch (1) - RH from the front power window/door lock switch finisher (2) - RH.

INSTALLATION
Installation is in the reverse order of removal.