Removal And Installation Audio Without Navigation

ANTENNA BASE


Removal and Installation


REMOVAL
1. Remove headlining. Exploded View (normal roof) or With a Sunroof Exploded View (sunroof).
2. Disconnect antenna feeder connector.
3. Remove nut to remove antenna base.

INSTALLATION
Install in the reverse order of removal.

CAUTION:
If the antenna base mounting nut is tightened looser than the specified torque, then this will lower the sensitivity of the antenna. On the other hand, if the nut is tightened tighter than the specified torque, then this will deform the roof panel.