With Intelligent Key System

SELECTIVE UNLOCK FUNCTION DOES NOT OPERATE





Diagnosis Procedure
1.CHECK "DOOR LOCK�UNLOCK SET" SETTING IN "WORK SUPPORT"
1. Select "DOOR LOCK" of "BCM" using CONSULT-III.
2. Select "DOOR LOCK-UNLOCK SET" in "WORK SUPPORT" mode.
3. Check "DOOR LOCK-UNLOCK SET" in "WORK SUPPORT"
With Intelligent Key System.
Is the inspection result normal?
YES - GO TO 2
NO - Set "DOOR LOCK-UNLOCK SET" in "WORK SUPPORT".
2.REPLACE BCM
1. Replace BCM. Removal And Installation With Intelligent Key System.
2. Confirm the operation after replacement.
Is the result normal?
YES - INSPECTION END
NO - Check intermittent incident. Intermittent Incident.