Tire Pressure Sensor Id Registration Cannot Be Completed

TIRE PRESSURE SENSOR ID REGISTRATION CANNOT BE COMPLETED





Description
The ID of the tire pressure sensor installed in each wheel cannot be registered in the tire pressure monitoring system. Inspect the tire pressure sensor or the tire pressure monitoring system circuit.




Diagnosis Procedure
1.CHECK ACTIVATION TOOL
Check activation tool.
Is the inspection result normal?
YES - GO TO 2.
NO - Replace battery for activation tool, or repair or replace activation tool.
2.TIRE PRESSURE SENSOR ID REGISTRATION
Perform tire pressure sensor ID registration. Work Procedure.
Is tire pressure sensor ID registration completed?
YES - INSPECTION END
NO - GO TO 3.
3.CHECK TIRE PRESSURE SIGNAL
Change the work location and perform ID registration again.
When ID registration is performed, which wheels do not react?
All wheels react and ID registration is possible.-INSPECTION END
Only certain wheel(s) do not react.-Replace applicable tire pressure sensor. Exploded View Removal And Installation, "Removal and
Installation".
All wheels do not react.-Check the tire pressure receiver (Remote keyless entry receiver). Remote Keyless Entry Receiver Remote Keyless Entry Receiver, Without Intelligent Key System (without intelligent key system).