Guard Frame Protector Assembly

REAR TRIM

GUARD FRAME PROTECTOR ASSEMBLY : Removal and Installation


CAUTION:
Replace guard frame protector assembly with a new part after removal as it cannot be reused.

REMOVAL






1.Stop storage lid assembly as shown in the figure. (during open operation).

CAUTION:
Storage lid assembly may close due to low oil pressure.
Always support storage lid assembly in the fully open position.





2.Disengage guard frame protector assembly (1) fixing pawls with a remover tool (A).

Broken triangle indicates : Pawl

3.Remove guard frame protector assembly.

INSTALLATION

Install in the reverse order of removal.