Key Slot Indicator

KEY SLOT INDICATOR

Description

Blinks when Intelligent Key insertion is required.


Component Function Check


1. CHECK FUNCTION

Check key slot illumination ("KEY SLOT ILLUMI") Active Test mode.
Is the inspection result normal?
YES- Key slot function is normal.
NO- .


Diagnosis Procedure


1. CHECK KEY SLOT INDICATOR OUTPUT SIGNAL

Check voltage between key slot harness connector and ground.





Is the inspection result normal?
YES- GO TO 5.
NO- GO TO 2.

2. CHECK KEY SLOT POWER SUPPLY CIRCUIT

1.Turn ignition switch OFF.
2.Disconnect key slot connector.
3.Check voltage between key slot harness connector and ground.





Is the inspection result normal?
YES- GO TO 3.
NO-1- Check 10 A fuse [No. 6 and 9 located in the fuse block (J/B)].
NO-2- Check harness for open or short between key slot and fuse.

3. CHECK KEY SLOT GROUND CIRCUIT

Check continuity between key slot harness connector and ground.





Is the inspection result normal?
YES- GO TO 4.
NO- Repair or replace key slot ground circuit.

4. CHECK KEY SLOT CIRCUIT

1.Turn ignition switch OFF.
2.Disconnect BCM connector.
3.Check continuity between BCM harness connector and key slot harness connector.





4.Check continuity between BCM harness connector and ground.





Is the inspection result normal?
YES- Replace key slot. Removal And Installation.
NO- Repair or replace harness.

5. CHECK INTERMITTENT INCIDENT

Intermittent Incident Regular Grade.
- INSPECTION END