Operation CHARM: Car repair manuals for everyone.
Home >> Nissan-Datsun >> 2012 >> Cube L4-1.8L (MR18DE) >> Repair and Diagnosis >> Body and Frame >> Body Control Systems >> Testing and Inspection >> Programming and Relearning >> Additional Service When Replacing Control Unit >> Work Procedure >> Without Intelligent Key System
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Without Intelligent Key System




ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT

Work Procedure


1. SAVING VEHICLE SPECIFICATION

CONSULT Configuration
Perform "READ CONFIGURATION" to save or print current vehicle specification. Without Intelligent Key System.
NOTE:
If "READ CONFIGURATION" can not be used, use the "WRITE CONFIGURATION - Manual selection" after replacing BCM.
- GO TO 2.

2. REPLACE BCM

Replace BCM. Removal And Installation.
- GO TO 3.

3. WRITING VEHICLE SPECIFICATION

CONSULT Configuration
Perform "WRITE CONFIGURATION - Config file" or "WRITE CONFIGURATION - Manual selection" to write vehicle specification. Without Intelligent Key System.
- GO TO 4.

4. INITIALIZE BCM (NATS) (IF EQUIPPED)

Perform BCM initialization. (NATS)
- WORK END
pro multis · About Operation CHARM