ECM

INSPECTION AND ADJUSTMENT

ECM : Description

Performing the following procedure can automatically activate recommunication of ECM and BCM, but only when the ECM is replaced with a new one*.
*: New one means a virgin ECM that is never energized on-board.
(In this step, initialization procedure using CONSULT is not necessary)
NOTE:
-When the replaced ECM is not a brand new, the specified procedure (Initializing of BCM and registration of all ignition keys) using CONSULT is necessary.
-If multiple keys are attached to the key holder, separate them before beginning work.
-Distinguish keys with unregistered key IDs from those with registered IDs.