Operation CHARM: Car repair manuals for everyone.
Home >> Nissan-Datsun >> 2012 >> Cube L4-1.8L (MR18DE) >> Repair and Diagnosis >> Body and Frame >> Locks >> Keyless Entry >> Testing and Inspection >> Programming and Relearning >> Special Repair Requirement >> Without Intelligent Key System
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Without Intelligent Key System




INSPECTION AND ADJUSTMENT

ECM : Special Repair Requirement


1. PERFORM ECM RECOMMUNICATING FUNCTION

1.Install ECM.
*
2.Insert the registered ignition key into key cylinder, then turn ignition switch ON.
*: To perform this step, use the key that is used before performing ECM replacement.
3.Maintain ignition switch in the ON position for at least 5 seconds.
4.Turn ignition switch OFF.
5.Start engine.
- GO TO 2.

2. PERFORM ADDITIONAL SERVICE PROCEDURE WHEN REPLACING ECM

performing the following procedure.
- HR-18DE (Except for California): "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT :
Special Repair Requirement"
- HR-18DE (For California): "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special
Repair Requirement"
- END
pro multis · About Operation CHARM