Keyless Entry Receiver: Service and Repair

REMOTE KEYLESS ENTRY RECEIVER

Removal and Installation


REMOVAL

1.Remove the front pillar upper finisher (RH). Removal And Installation.
2.Remove the side ventilator grille (RH). Removal And Installation.
3.Remove the upper glove box. Upper Glove Box.
4.Remove cluster lid D. Cluster Lid D.





5.Remove the remote keyless entry receiver bolt (A).
6.Disconnect the harness connector (1) and remove the remote keyless entry receiver (2).

INSTALLATION

Installation is in the reverse order of removal.
- Perform TPMS ID registration. ID Registration Procedure.