Hazard Function

HAZARD FUNCTION

Description

Perform answer-back for each operation with number of blinks.


Component Function Check


1. CHECK FUNCTION

1.Use CONSULT to perform Active Test "FLASHER".
2.Touch "RH" and "LH" to check that it works normally.
Is the inspection result normal?
YES- Hazard warning lamp circuit is OK.
NO- .


Diagnosis Procedure


1. CHECK HAZARD SWITCH CIRCUIT

Operate the hazard lights by turning ON the hazard warning switch.
Do the lights operate normally?
YES- Replace the BCM. Service and Repair.
NO- Repair or replace hazard warning switch circuit. [1][2]Electrical Diagrams.